Minimum

SCPI Command :

CONFigure:LTE:SIGNaling<instance>:RFSettings:SCC<Carrier>:UDEFined:FREQuency:DL:MINimum

class MinimumCls

Minimum commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(secondaryCompCarrier=SecondaryCompCarrier.Default) → int

# SCPI: CONFigure:LTE:SIGNaling<instance>:RFSettings:SCC<Carrier>:UDEFined:FREQuency:DL:MINimum
value: int = driver.configure.rfSettings.scc.userDefined.frequency.downlink.minimum.get(secondaryCompCarrier = repcap.SecondaryCompCarrier.Default)

Configures the carrier center frequency corresponding to the minimum downlink channel number for the user-defined band. The other frequencies are calculated from the settings as follows: FREQ:DL:MAX = FREQ:DL:MIN + (CHAN:DL:MAX - CHAN:DL:MIN) * 100 kHz FREQ:UL:MIN = FREQ:DL:MIN - UDSeparation FREQ:UL:MAX = FREQ:DL:MIN - UDSeparation + (CHAN:DL:MAX - CHAN:DL:MIN) * 100 kHz

param secondaryCompCarrier:

optional repeated capability selector. Default value: CC1 (settable in the interface ‘Scc’)

return:

frequency: numeric The allowed range depends on the remaining user-defined band settings. All frequencies resulting from the calculations stated above must be located within the following frequency range. Range: 70 MHz to 6 GHz, Unit: Hz

set(frequency: int, secondaryCompCarrier=SecondaryCompCarrier.Default) → None

# SCPI: CONFigure:LTE:SIGNaling<instance>:RFSettings:SCC<Carrier>:UDEFined:FREQuency:DL:MINimum
driver.configure.rfSettings.scc.userDefined.frequency.downlink.minimum.set(frequency = 1, secondaryCompCarrier = repcap.SecondaryCompCarrier.Default)

Configures the carrier center frequency corresponding to the minimum downlink channel number for the user-defined band. The other frequencies are calculated from the settings as follows: FREQ:DL:MAX = FREQ:DL:MIN + (CHAN:DL:MAX - CHAN:DL:MIN) * 100 kHz FREQ:UL:MIN = FREQ:DL:MIN - UDSeparation FREQ:UL:MAX = FREQ:DL:MIN - UDSeparation + (CHAN:DL:MAX - CHAN:DL:MIN) * 100 kHz

param frequency:

numeric The allowed range depends on the remaining user-defined band settings. All frequencies resulting from the calculations stated above must be located within the following frequency range. Range: 70 MHz to 6 GHz, Unit: Hz

param secondaryCompCarrier:

optional repeated capability selector. Default value: CC1 (settable in the interface ‘Scc’)