Caggregation

SCPI Command :

CONFigure:LTE:SIGNaling<Instance>:CAGGregation:SET
class CaggregationCls[source]

Caggregation commands group definition. 1 total commands, 0 Subgroups, 1 group commands

class SetStruct[source]

Structure for setting input parameters. Contains optional set arguments. Fields:

  • Set_Apos_1: enums.SetPosition: INV | PCC | SCC1 | SCC2 | SCC3 | SCC4 | SCC5 | SCC6 | SCC7 Primary carrier of set A

  • Set_Apos_2: enums.SetPosition: INV | PCC | SCC1 | SCC2 | SCC3 | SCC4 | SCC5 | SCC6 | SCC7 Second carrier of set A

  • Set_Apos_3: enums.SetPosition: INV | PCC | SCC1 | SCC2 | SCC3 | SCC4 | SCC5 | SCC6 | SCC7 Third carrier of set A

  • Set_Apos_4: enums.SetPosition: INV | PCC | SCC1 | SCC2 | SCC3 | SCC4 | SCC5 | SCC6 | SCC7 Fourth carrier of set A

  • Set_Bpos_1: enums.SetPosition: INV | PCC | SCC1 | SCC2 | SCC3 | SCC4 | SCC5 | SCC6 | SCC7 Primary carrier of set B

  • Set_Bpos_2: enums.SetPosition: INV | PCC | SCC1 | SCC2 | SCC3 | SCC4 | SCC5 | SCC6 | SCC7 Second carrier of set B

  • Set_Bpos_3: enums.SetPosition: INV | PCC | SCC1 | SCC2 | SCC3 | SCC4 | SCC5 | SCC6 | SCC7 Third carrier of set B

  • Set_Bpos_4: enums.SetPosition: INV | PCC | SCC1 | SCC2 | SCC3 | SCC4 | SCC5 | SCC6 | SCC7 Fourth carrier of set B

  • Set_Cpos_1: enums.SetPosition: Optional setting parameter. INV | PCC | SCC1 | SCC2 | SCC3 | SCC4 | SCC5 | SCC6 | SCC7 Primary carrier of set C

  • Set_Cpos_2: enums.SetPosition: Optional setting parameter. INV | PCC | SCC1 | SCC2 | SCC3 | SCC4 | SCC5 | SCC6 | SCC7 Second carrier of set C

  • Set_Cpos_3: enums.SetPosition: Optional setting parameter. INV | PCC | SCC1 | SCC2 | SCC3 | SCC4 | SCC5 | SCC6 | SCC7 Third carrier of set C

  • Set_Cpos_4: enums.SetPosition: Optional setting parameter. INV | PCC | SCC1 | SCC2 | SCC3 | SCC4 | SCC5 | SCC6 | SCC7 Fourth carrier of set C

get_set() → SetStruct[source]
# SCPI: CONFigure:LTE:SIGNaling<Instance>:CAGGregation:SET
value: SetStruct = driver.configure.caggregation.get_set()

Configures the alignment of uplink component carriers for intraband contiguous uplink carrier aggregation. The command configures set A, set B and set C. It aligns all component carriers of a set for contiguous UL CA.

INTRO_CMD_HELP: Rules for valid parameter combinations:

  • Enable the uplink of a component carrier before adding it to a set.

  • Use set C only for scenarios with at least 6 carriers. Use set B only for scenarios with at least 4 carriers.

  • To disable a set, select INV for all four parameters of the set. If you omit the <SetC…> settings, set C is disabled (all four set to INV) .

  • To use a set, select the primary carrier for <…pos1> and a second carrier for <…pos2>. To align only two carriers, set <…pos3> and <…pos4> to INV. To align three carriers, select <…pos3> and set <…pos4> to INV. To align four carriers, select <…pos3> and <…pos4>.

  • All carriers of a set must fit into the band of the primary carrier, without changing the frequency of the primary carrier.

return:

structure: for return value, see the help for SetStruct structure arguments.

set_set(value: SetStruct) → None[source]
# SCPI: CONFigure:LTE:SIGNaling<Instance>:CAGGregation:SET
structure = driver.configure.caggregation.SetStruct()
structure.Set_Apos_1: enums.SetPosition = enums.SetPosition.INV
structure.Set_Apos_2: enums.SetPosition = enums.SetPosition.INV
structure.Set_Apos_3: enums.SetPosition = enums.SetPosition.INV
structure.Set_Apos_4: enums.SetPosition = enums.SetPosition.INV
structure.Set_Bpos_1: enums.SetPosition = enums.SetPosition.INV
structure.Set_Bpos_2: enums.SetPosition = enums.SetPosition.INV
structure.Set_Bpos_3: enums.SetPosition = enums.SetPosition.INV
structure.Set_Bpos_4: enums.SetPosition = enums.SetPosition.INV
structure.Set_Cpos_1: enums.SetPosition = enums.SetPosition.INV
structure.Set_Cpos_2: enums.SetPosition = enums.SetPosition.INV
structure.Set_Cpos_3: enums.SetPosition = enums.SetPosition.INV
structure.Set_Cpos_4: enums.SetPosition = enums.SetPosition.INV
driver.configure.caggregation.set_set(value = structure)

Configures the alignment of uplink component carriers for intraband contiguous uplink carrier aggregation. The command configures set A, set B and set C. It aligns all component carriers of a set for contiguous UL CA.

INTRO_CMD_HELP: Rules for valid parameter combinations:

  • Enable the uplink of a component carrier before adding it to a set.

  • Use set C only for scenarios with at least 6 carriers. Use set B only for scenarios with at least 4 carriers.

  • To disable a set, select INV for all four parameters of the set. If you omit the <SetC…> settings, set C is disabled (all four set to INV) .

  • To use a set, select the primary carrier for <…pos1> and a second carrier for <…pos2>. To align only two carriers, set <…pos3> and <…pos4> to INV. To align three carriers, select <…pos3> and set <…pos4> to INV. To align four carriers, select <…pos3> and <…pos4>.

  • All carriers of a set must fit into the band of the primary carrier, without changing the frequency of the primary carrier.

param value:

see the help for SetStruct structure arguments.