Downlink

SCPI Command :

CONFigure:LTE:SIGNaling<instance>:RFSettings:SCC<Carrier>:FOFFset:DL

class DownlinkCls

Downlink commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(secondaryCompCarrier=SecondaryCompCarrier.Default) → int

# SCPI: CONFigure:LTE:SIGNaling<instance>:RFSettings:SCC<Carrier>:FOFFset:DL
value: int = driver.configure.rfSettings.scc.foffset.downlink.get(secondaryCompCarrier = repcap.SecondaryCompCarrier.Default)

Specifies a positive or negative frequency offset to be added to the center frequency of the configured downlink channel. You can use the PCC command to configure the same offset for the PCC and all SCCs. Or you can use the PCC and SCC command to configure different values. See also method RsCmwLteSig.Configure.RfSettings.Pcc.Foffset.Downlink.ucSpecific.

param secondaryCompCarrier:

optional repeated capability selector. Default value: CC1 (settable in the interface ‘Scc’)

return:

offset: numeric Range: -100 kHz to 100 kHz, Unit: Hz

set(offset: int, secondaryCompCarrier=SecondaryCompCarrier.Default) → None

# SCPI: CONFigure:LTE:SIGNaling<instance>:RFSettings:SCC<Carrier>:FOFFset:DL
driver.configure.rfSettings.scc.foffset.downlink.set(offset = 1, secondaryCompCarrier = repcap.SecondaryCompCarrier.Default)

Specifies a positive or negative frequency offset to be added to the center frequency of the configured downlink channel. You can use the PCC command to configure the same offset for the PCC and all SCCs. Or you can use the PCC and SCC command to configure different values. See also method RsCmwLteSig.Configure.RfSettings.Pcc.Foffset.Downlink.ucSpecific.

param offset:

numeric Range: -100 kHz to 100 kHz, Unit: Hz

param secondaryCompCarrier:

optional repeated capability selector. Default value: CC1 (settable in the interface ‘Scc’)