Uplink

SCPI Commands :

CONFigure:LTE:SIGNaling<instance>[:PCC]:EMTC:HOPPing:UL:HOFFset
CONFigure:LTE:SIGNaling<instance>[:PCC]:EMTC:HOPPing:UL:ENABle

class UplinkCls

Uplink commands group definition. 4 total commands, 2 Subgroups, 2 group commands

get_enable() → bool

# SCPI: CONFigure:LTE:SIGNaling<instance>[:PCC]:EMTC:HOPPing:UL:ENABle
value: bool = driver.configure.pcc.emtc.hopping.uplink.get_enable()

Enables or disables frequency hopping for eMTC, DL or UL.

return:

enable: OFF | ON

get_hoffset() → int

# SCPI: CONFigure:LTE:SIGNaling<instance>[:PCC]:EMTC:HOPPing:UL:HOFFset
value: int = driver.configure.pcc.emtc.hopping.uplink.get_hoffset()

Specifies the size of one frequency hop, DL or UL. For the number of narrowbands per cell bandwidth, see Table ‘Narrowbands and resource blocks per cell BW’.

return:

offset: numeric Hop size in narrowbands Range: 1 to 16 (depends on cell BW)

set_enable(enable: bool) → None

# SCPI: CONFigure:LTE:SIGNaling<instance>[:PCC]:EMTC:HOPPing:UL:ENABle
driver.configure.pcc.emtc.hopping.uplink.set_enable(enable = False)

Enables or disables frequency hopping for eMTC, DL or UL.

param enable:

OFF | ON

set_hoffset(offset: int) → None

# SCPI: CONFigure:LTE:SIGNaling<instance>[:PCC]:EMTC:HOPPing:UL:HOFFset
driver.configure.pcc.emtc.hopping.uplink.set_hoffset(offset = 1)

Specifies the size of one frequency hop, DL or UL. For the number of narrowbands per cell bandwidth, see Table ‘Narrowbands and resource blocks per cell BW’.

param offset:

numeric Hop size in narrowbands Range: 1 to 16 (depends on cell BW)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.configure.pcc.emtc.hopping.uplink.clone()

Subgroups

• A
• B