Downlink
SCPI Commands :
CONFigure:LTE:SIGNaling<instance>[:PCC]:EMTC:HOPPing:DL:HOFFset
CONFigure:LTE:SIGNaling<instance>[:PCC]:EMTC:HOPPing:DL:ENABle
- class DownlinkCls[source]
Downlink commands group definition. 4 total commands, 2 Subgroups, 2 group commands
- get_enable() bool [source]
# SCPI: CONFigure:LTE:SIGNaling<instance>[:PCC]:EMTC:HOPPing:DL:ENABle value: bool = driver.configure.pcc.emtc.hopping.downlink.get_enable()
Enables or disables frequency hopping for eMTC, DL or UL.
- return:
enable: OFF | ON
- get_hoffset() int [source]
# SCPI: CONFigure:LTE:SIGNaling<instance>[:PCC]:EMTC:HOPPing:DL:HOFFset value: int = driver.configure.pcc.emtc.hopping.downlink.get_hoffset()
Specifies the size of one frequency hop, DL or UL. For the number of narrowbands per cell bandwidth, see Table ‘Narrowbands and resource blocks per cell BW’.
- return:
offset: numeric Hop size in narrowbands Range: 1 to 16 (depends on cell BW)
- set_enable(enable: bool) None [source]
# SCPI: CONFigure:LTE:SIGNaling<instance>[:PCC]:EMTC:HOPPing:DL:ENABle driver.configure.pcc.emtc.hopping.downlink.set_enable(enable = False)
Enables or disables frequency hopping for eMTC, DL or UL.
- param enable:
OFF | ON
- set_hoffset(offset: int) None [source]
# SCPI: CONFigure:LTE:SIGNaling<instance>[:PCC]:EMTC:HOPPing:DL:HOFFset driver.configure.pcc.emtc.hopping.downlink.set_hoffset(offset = 1)
Specifies the size of one frequency hop, DL or UL. For the number of narrowbands per cell bandwidth, see Table ‘Narrowbands and resource blocks per cell BW’.
- param offset:
numeric Hop size in narrowbands Range: 1 to 16 (depends on cell BW)
Cloning the Group
# Create a clone of the original group, that exists independently
group2 = driver.configure.pcc.emtc.hopping.downlink.clone()
Subgroups