CltPower
SCPI Commands :
CONFigure:LTE:SIGNaling<instance>:UL:SETC:PUSCh:TPC:CLTPower:OFFSet
CONFigure:LTE:SIGNaling<instance>:UL:SETC:PUSCh:TPC:CLTPower
- class CltPowerCls[source]
CltPower commands group definition. 2 total commands, 0 Subgroups, 2 group commands
- get_offset() float [source]
# SCPI: CONFigure:LTE:SIGNaling<instance>:UL:SETC:PUSCh:TPC:CLTPower:OFFSet value: float = driver.configure.uplink.setc.pusch.tpc.cltPower.get_offset()
Defines a target power offset relative to the power primary carrier, for power control with the TPC setup CLOop. The setting is irrelevant for carriers with independent UL power control.
- return:
offset: numeric Target power = primary carrier target power + Offset Range: -7 dB to 7 dB, Unit: dB
- get_value() float [source]
# SCPI: CONFigure:LTE:SIGNaling<instance>:UL:SETC:PUSCh:TPC:CLTPower value: float = driver.configure.uplink.setc.pusch.tpc.cltPower.get_value()
Defines the target power for power control with the TPC setup CLOop.
- return:
power: numeric Range: -50 dBm to 33 dBm, Unit: dBm
- set_offset(offset: float) None [source]
# SCPI: CONFigure:LTE:SIGNaling<instance>:UL:SETC:PUSCh:TPC:CLTPower:OFFSet driver.configure.uplink.setc.pusch.tpc.cltPower.set_offset(offset = 1.0)
Defines a target power offset relative to the power primary carrier, for power control with the TPC setup CLOop. The setting is irrelevant for carriers with independent UL power control.
- param offset:
numeric Target power = primary carrier target power + Offset Range: -7 dB to 7 dB, Unit: dB
- set_value(power: float) None [source]
# SCPI: CONFigure:LTE:SIGNaling<instance>:UL:SETC:PUSCh:TPC:CLTPower driver.configure.uplink.setc.pusch.tpc.cltPower.set_value(power = 1.0)
Defines the target power for power control with the TPC setup CLOop.
- param power:
numeric Range: -50 dBm to 33 dBm, Unit: dBm