CltPower

SCPI Commands :

CONFigure:LTE:SIGNaling<instance>:UL:SETB:PUSCh:TPC:CLTPower:OFFSet
CONFigure:LTE:SIGNaling<instance>:UL:SETB:PUSCh:TPC:CLTPower

class CltPowerCls

CltPower commands group definition. 2 total commands, 0 Subgroups, 2 group commands

get_offset() → float

# SCPI: CONFigure:LTE:SIGNaling<instance>:UL:SETB:PUSCh:TPC:CLTPower:OFFSet
value: float = driver.configure.uplink.setb.pusch.tpc.cltPower.get_offset()

Defines a target power offset relative to the power primary carrier, for power control with the TPC setup CLOop. The setting is irrelevant for carriers with independent UL power control.

return:

offset: numeric Target power = primary carrier target power + Offset Range: -7 dB to 7 dB, Unit: dB

get_value() → float

# SCPI: CONFigure:LTE:SIGNaling<instance>:UL:SETB:PUSCh:TPC:CLTPower
value: float = driver.configure.uplink.setb.pusch.tpc.cltPower.get_value()

Defines the target power for power control with the TPC setup CLOop.

return:

power: numeric Range: -50 dBm to 33 dBm, Unit: dBm

set_offset(offset: float) → None

# SCPI: CONFigure:LTE:SIGNaling<instance>:UL:SETB:PUSCh:TPC:CLTPower:OFFSet
driver.configure.uplink.setb.pusch.tpc.cltPower.set_offset(offset = 1.0)

Defines a target power offset relative to the power primary carrier, for power control with the TPC setup CLOop. The setting is irrelevant for carriers with independent UL power control.

param offset:

numeric Target power = primary carrier target power + Offset Range: -7 dB to 7 dB, Unit: dB

set_value(power: float) → None

# SCPI: CONFigure:LTE:SIGNaling<instance>:UL:SETB:PUSCh:TPC:CLTPower
driver.configure.uplink.setb.pusch.tpc.cltPower.set_value(power = 1.0)

Defines the target power for power control with the TPC setup CLOop.

param power:

numeric Range: -50 dBm to 33 dBm, Unit: dBm