Set

SCPI Command :

CONFigure:LTE:SIGNaling<instance>:UL:SCC<Carrier>:PUSCh:TPC:SET

class SetCls

Set commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(secondaryCompCarrier=SecondaryCompCarrier.Default) → SetType

# SCPI: CONFigure:LTE:SIGNaling<instance>:UL:SCC<Carrier>:PUSCh:TPC:SET
value: enums.SetType = driver.configure.uplink.scc.pusch.tpc.set.get(secondaryCompCarrier = repcap.SecondaryCompCarrier.Default)

Selects the active TPC setup to be executed for power control of the PUSCH. For some TPC setups, the execution must be explicitly triggered via method RsCmwLteSig.Configure.Uplink.Pcc.Pusch.Tpc.Pexecute.set.

param secondaryCompCarrier:

optional repeated capability selector. Default value: CC1 (settable in the interface ‘Scc’)

return:

set_type: MINPower | MAXPower | CONStant | SINGle | UDSingle | UDContinuous | ALT0 | CLOop | RPControl | FULPower MINPower: command the UE to minimum power MAXPower: command the UE to maximum power CONStant: command the UE to keep the power constant SINGle: send a pattern once (only one type of TPC command) UDSingle: send a pattern once (mixed TPC commands allowed) UDContinuous: send a pattern continuously ALT0: send an alternating pattern continuously CLOop: command the UE to a configurable target power RPControl: patterns for 3GPP relative power control test FULPower: flexible uplink power

set(set_type: SetType, secondaryCompCarrier=SecondaryCompCarrier.Default) → None

# SCPI: CONFigure:LTE:SIGNaling<instance>:UL:SCC<Carrier>:PUSCh:TPC:SET
driver.configure.uplink.scc.pusch.tpc.set.set(set_type = enums.SetType.ALT0, secondaryCompCarrier = repcap.SecondaryCompCarrier.Default)

Selects the active TPC setup to be executed for power control of the PUSCH. For some TPC setups, the execution must be explicitly triggered via method RsCmwLteSig.Configure.Uplink.Pcc.Pusch.Tpc.Pexecute.set.

param set_type:

MINPower | MAXPower | CONStant | SINGle | UDSingle | UDContinuous | ALT0 | CLOop | RPControl | FULPower MINPower: command the UE to minimum power MAXPower: command the UE to maximum power CONStant: command the UE to keep the power constant SINGle: send a pattern once (only one type of TPC command) UDSingle: send a pattern once (mixed TPC commands allowed) UDContinuous: send a pattern continuously ALT0: send an alternating pattern continuously CLOop: command the UE to a configurable target power RPControl: patterns for 3GPP relative power control test FULPower: flexible uplink power

param secondaryCompCarrier:

optional repeated capability selector. Default value: CC1 (settable in the interface ‘Scc’)