Confidence

SCPI Commands :

CONFigure:LTE:SIGNaling<instance>:EBLer:CONFidence:OASCondition
CONFigure:LTE:SIGNaling<instance>:EBLer:CONFidence:MTTime
CONFigure:LTE:SIGNaling<instance>:EBLer:CONFidence:LERate

class ConfidenceCls[source]

Confidence commands group definition. 3 total commands, 0 Subgroups, 3 group commands

get_lerate() → LimitErrRation[source]

# SCPI: CONFigure:LTE:SIGNaling<instance>:EBLer:CONFidence:LERate
value: enums.LimitErrRation = driver.configure.ebler.confidence.get_lerate()

Selects the limit error ratio for a confidence BLER measurement.

return:

rate: P001 | P010 | P050 P001: 0.1 %, 3GPP TS 36.521 annex G.4 P010: 1 %, 3GPP TS 36.521 annex G.4 P050: 5 %, 3GPP TS 36.521 annex G.2

get_mt_time() → int[source]

# SCPI: CONFigure:LTE:SIGNaling<instance>:EBLer:CONFidence:MTTime
value: int = driver.configure.ebler.confidence.get_mt_time()

Specifies a minimum test time for confidence BLER measurements.

return:

time: numeric Minimum number of processed subframes Range: 0 to 500E+3

get_oas_condition() → BlerStopCondition[source]

# SCPI: CONFigure:LTE:SIGNaling<instance>:EBLer:CONFidence:OASCondition
value: enums.BlerStopCondition = driver.configure.ebler.confidence.get_oas_condition()

Configures the stop decision and the overall result calculation for confidence BLER measurements with carrier aggregation.

return:

condition: PCC | SCC1 | SCC2 | AC1St | ACWait PCC: PCC only SCC1: SCC1 only SCC2: SCC2 only AC1St: all carriers, stop on 1st fail ACWait: all carriers, wait for all CCs

set_lerate(rate: LimitErrRation) → None[source]

# SCPI: CONFigure:LTE:SIGNaling<instance>:EBLer:CONFidence:LERate
driver.configure.ebler.confidence.set_lerate(rate = enums.LimitErrRation.P001)

Selects the limit error ratio for a confidence BLER measurement.

param rate:

P001 | P010 | P050 P001: 0.1 %, 3GPP TS 36.521 annex G.4 P010: 1 %, 3GPP TS 36.521 annex G.4 P050: 5 %, 3GPP TS 36.521 annex G.2

set_mt_time(time: int) → None[source]

# SCPI: CONFigure:LTE:SIGNaling<instance>:EBLer:CONFidence:MTTime
driver.configure.ebler.confidence.set_mt_time(time = 1)

Specifies a minimum test time for confidence BLER measurements.

param time:

numeric Minimum number of processed subframes Range: 0 to 500E+3

set_oas_condition(condition: BlerStopCondition) → None[source]

# SCPI: CONFigure:LTE:SIGNaling<instance>:EBLer:CONFidence:OASCondition
driver.configure.ebler.confidence.set_oas_condition(condition = enums.BlerStopCondition.AC1St)

Configures the stop decision and the overall result calculation for confidence BLER measurements with carrier aggregation.

param condition:

PCC | SCC1 | SCC2 | AC1St | ACWait PCC: PCC only SCC1: SCC1 only SCC2: SCC2 only AC1St: all carriers, stop on 1st fail ACWait: all carriers, wait for all CCs