Mimo<Mimo>
RepCap Settings
# Range: M42 .. M44
rc = driver.configure.connection.scc.schModel.mimo.repcap_mimo_get()
driver.configure.connection.scc.schModel.mimo.repcap_mimo_set(repcap.Mimo.M42)
SCPI Command :
CONFigure:LTE:SIGNaling<instance>:CONNection:SCC<Carrier>:SCHModel:MIMO<Mimo>
- class MimoCls[source]
Mimo commands group definition. 1 total commands, 0 Subgroups, 1 group commands Repeated Capability: Mimo, default value after init: Mimo.M42
- class MimoStruct[source]
Structure for setting input parameters. Contains optional setting parameters. Fields:
H_11_Abs: float: numeric Range: 0 to 1
H_11_Phi: int: numeric Range: 0 deg to 345 deg, Unit: deg
H_12_Abs: float: numeric Range: 0 to 1
H_12_Phi: int: numeric Range: 0 deg to 345 deg, Unit: deg
H_13_Abs: float: numeric Range: 0 to 1
H_13_Phi: int: numeric Range: 0 deg to 345 deg, Unit: deg
H_14_Abs: float: numeric Range: 0 to 1
H_14_Phi: int: numeric Range: 0 deg to 345 deg, Unit: deg
H_21_Abs: float: numeric Range: 0 to 1
H_21_Phi: int: numeric Range: 0 deg to 345 deg, Unit: deg
H_22_Abs: float: numeric Range: 0 to 1
H_22_Phi: int: numeric Range: 0 deg to 345 deg, Unit: deg
H_23_Abs: float: numeric Range: 0 to 1
H_23_Phi: int: numeric Range: 0 deg to 345 deg, Unit: deg
H_24_Abs: float: numeric Range: 0 to 1
H_24_Phi: int: numeric Range: 0 deg to 345 deg, Unit: deg
H_31_Abs: float: Optional setting parameter. numeric Range: 0 to 1
H_31_Phi: int: Optional setting parameter. numeric Range: 0 deg to 345 deg, Unit: deg
H_32_Abs: float: Optional setting parameter. numeric Range: 0 to 1
H_32_Phi: int: Optional setting parameter. numeric Range: 0 deg to 345 deg, Unit: deg
H_33_Abs: float: Optional setting parameter. numeric Range: 0 to 1
H_33_Phi: int: Optional setting parameter. numeric Range: 0 deg to 345 deg, Unit: deg
H_34_Abs: float: Optional setting parameter. numeric Range: 0 to 1
H_34_Phi: int: Optional setting parameter. numeric Range: 0 deg to 345 deg, Unit: deg
H_41_Abs: float: Optional setting parameter. numeric Range: 0 to 1
H_41_Phi: int: Optional setting parameter. numeric Range: 0 deg to 345 deg, Unit: deg
H_42_Abs: float: Optional setting parameter. numeric Range: 0 to 1
H_42_Phi: int: Optional setting parameter. numeric Range: 0 deg to 345 deg, Unit: deg
H_43_Abs: float: Optional setting parameter. numeric Range: 0 to 1
H_43_Phi: int: Optional setting parameter. numeric Range: 0 deg to 345 deg, Unit: deg
H_44_Abs: float: Optional setting parameter. numeric Range: 0 to 1
H_44_Phi: int: Optional setting parameter. numeric Range: 0 deg to 345 deg, Unit: deg
- get(secondaryCompCarrier=SecondaryCompCarrier.Default, mimo=Mimo.Default) MimoStruct [source]
# SCPI: CONFigure:LTE:SIGNaling<instance>:CONNection:SCC<Carrier>:SCHModel:MIMO<Mimo> value: MimoStruct = driver.configure.connection.scc.schModel.mimo.get(secondaryCompCarrier = repcap.SecondaryCompCarrier.Default, mimo = repcap.Mimo.Default)
- Configures the coefficients of the user-defined channel matrix, characterizing the radio channel for MIMO 4x2 or MIMO 4x4.
INTRO_CMD_HELP: There are two types of parameters:
<hnmabs> defines the square of the magnitude of the channel coefficient nm: <hnmabs> = (hnm) 2 The sum of all <h1mabs> must equal 1: <h11abs> + <h12abs> + <h13abs> + <h14abs> = 1 The same applies to <h2mabs>, <h3mabs> and <h4mabs>.
<hnmphi> defines the phase of the channel coefficient nm: <hnmphi> = φ(hnm) The phase can be entered in steps of 15 degrees. The setting is rounded, if necessary.
The *RST values depend on <Mimo> and are listed as *RST 4x2 / *RST 4x4.
- param secondaryCompCarrier:
optional repeated capability selector. Default value: CC1 (settable in the interface ‘Scc’)
- param mimo:
optional repeated capability selector. Default value: M42 (settable in the interface ‘Mimo’)
- return:
structure: for return value, see the help for MimoStruct structure arguments.
- set(structure: MimoStruct, secondaryCompCarrier=SecondaryCompCarrier.Default, mimo=Mimo.Default) None [source]
# SCPI: CONFigure:LTE:SIGNaling<instance>:CONNection:SCC<Carrier>:SCHModel:MIMO<Mimo> structure = driver.configure.connection.scc.schModel.mimo.MimoStruct() structure.H_11_Abs: float = 1.0 structure.H_11_Phi: int = 1 structure.H_12_Abs: float = 1.0 structure.H_12_Phi: int = 1 structure.H_13_Abs: float = 1.0 structure.H_13_Phi: int = 1 structure.H_14_Abs: float = 1.0 structure.H_14_Phi: int = 1 structure.H_21_Abs: float = 1.0 structure.H_21_Phi: int = 1 structure.H_22_Abs: float = 1.0 structure.H_22_Phi: int = 1 structure.H_23_Abs: float = 1.0 structure.H_23_Phi: int = 1 structure.H_24_Abs: float = 1.0 structure.H_24_Phi: int = 1 structure.H_31_Abs: float = 1.0 structure.H_31_Phi: int = 1 structure.H_32_Abs: float = 1.0 structure.H_32_Phi: int = 1 structure.H_33_Abs: float = 1.0 structure.H_33_Phi: int = 1 structure.H_34_Abs: float = 1.0 structure.H_34_Phi: int = 1 structure.H_41_Abs: float = 1.0 structure.H_41_Phi: int = 1 structure.H_42_Abs: float = 1.0 structure.H_42_Phi: int = 1 structure.H_43_Abs: float = 1.0 structure.H_43_Phi: int = 1 structure.H_44_Abs: float = 1.0 structure.H_44_Phi: int = 1 driver.configure.connection.scc.schModel.mimo.set(structure, secondaryCompCarrier = repcap.SecondaryCompCarrier.Default, mimo = repcap.Mimo.Default)
- Configures the coefficients of the user-defined channel matrix, characterizing the radio channel for MIMO 4x2 or MIMO 4x4.
INTRO_CMD_HELP: There are two types of parameters:
<hnmabs> defines the square of the magnitude of the channel coefficient nm: <hnmabs> = (hnm) 2 The sum of all <h1mabs> must equal 1: <h11abs> + <h12abs> + <h13abs> + <h14abs> = 1 The same applies to <h2mabs>, <h3mabs> and <h4mabs>.
<hnmphi> defines the phase of the channel coefficient nm: <hnmphi> = φ(hnm) The phase can be entered in steps of 15 degrees. The setting is rounded, if necessary.
The *RST values depend on <Mimo> and are listed as *RST 4x2 / *RST 4x4.
- param structure:
for set value, see the help for MimoStruct structure arguments.
- param secondaryCompCarrier:
optional repeated capability selector. Default value: CC1 (settable in the interface ‘Scc’)
- param mimo:
optional repeated capability selector. Default value: M42 (settable in the interface ‘Mimo’)
Cloning the Group
# Create a clone of the original group, that exists independently
group2 = driver.configure.connection.scc.schModel.mimo.clone()