Csirs

SCPI Command :

CONFigure:LTE:SIGNaling<instance>:CONNection[:PCC]:FCPRi:DL:MCSTable:CSIRs:UDEFined

class CsirsCls[source]

Csirs commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get_user_defined() → List[int][source]

# SCPI: CONFigure:LTE:SIGNaling<instance>:CONNection[:PCC]:FCPRi:DL:MCSTable:CSIRs:UDEFined
value: List[int] = driver.configure.connection.pcc.fcpri.downlink.mcsTable.csirs.get_user_defined()

Configures a user-defined mapping table for subframes with CSI-RS that assigns an MCS index value to each possible reported wideband CQI index value. The table is used for the scheduling type ‘Follow WB CQI-PMI-RI’ if the table mode is set to UDEFined.

return:

mcs: numeric Comma-separated list of 15 MCS values, for reported CQI index value 1 to 15 The range is restricted by the highest allowed modulation scheme: max 27 with 256-QAM, max 26 with 1024-QAM. Range: 0 to 28

set_user_defined(mcs: List[int]) → None[source]

# SCPI: CONFigure:LTE:SIGNaling<instance>:CONNection[:PCC]:FCPRi:DL:MCSTable:CSIRs:UDEFined
driver.configure.connection.pcc.fcpri.downlink.mcsTable.csirs.set_user_defined(mcs = [1, 2, 3])

Configures a user-defined mapping table for subframes with CSI-RS that assigns an MCS index value to each possible reported wideband CQI index value. The table is used for the scheduling type ‘Follow WB CQI-PMI-RI’ if the table mode is set to UDEFined.

param mcs:

numeric Comma-separated list of 15 MCS values, for reported CQI index value 1 to 15 The range is restricted by the highest allowed modulation scheme: max 27 with 256-QAM, max 26 with 1024-QAM. Range: 0 to 28