CatRfOut

SCPI Command :

ROUTe:LTE:SIGNaling<instance>:SCENario:CATRfout:FLEXible
class CatRfOutCls[source]

CatRfOut commands group definition. 1 total commands, 0 Subgroups, 1 group commands

class FlexibleStruct[source]

Structure for setting input parameters. Contains optional set arguments. Fields:

  • Pcc_Bb_Board: enums.BasebandBoard: Signaling unit for the PCC

  • Rx_Connector: enums.RxConnector: RF connector for the PCC input path

  • Rx_Converter: enums.RxConverter: RX module for the PCC input path

  • Pcc_Tx_Connector: enums.TxConnector: RF connector for the PCC output path

  • Pcc_Tx_Converter: enums.TxConverter: TX module for the PCC output path

  • Scc_Bb_Board: enums.BasebandBoard: Signaling unit for the SCC

  • Scc_Tx_Connector: enums.TxConnector: RF connector for the SCC output path

  • Scc_Tx_Converter: enums.TxConverter: TX module for the SCC output path

  • Scc_Rx_Connector: enums.RxConnector: Optional setting parameter. RF connector for the SCC input path, for UL CA only

  • Scc_Rx_Converter: enums.RxConverter: Optional setting parameter. RX module for the SCC input path, for UL CA only

get_flexible() → FlexibleStruct[source]
# SCPI: ROUTe:LTE:SIGNaling<instance>:SCENario:CATRfout:FLEXible
value: FlexibleStruct = driver.route.scenario.catRfOut.get_flexible()

Activates the scenario ‘2CC - 1x1 1x1’ and selects the signal paths. For possible parameter values, see ‘Values for signal path selection’.

return:

structure: for return value, see the help for FlexibleStruct structure arguments.

set_flexible(value: FlexibleStruct) → None[source]
# SCPI: ROUTe:LTE:SIGNaling<instance>:SCENario:CATRfout:FLEXible
structure = driver.route.scenario.catRfOut.FlexibleStruct()
structure.Pcc_Bb_Board: enums.BasebandBoard = enums.BasebandBoard.BBR1
structure.Rx_Connector: enums.RxConnector = enums.RxConnector.I11I
structure.Rx_Converter: enums.RxConverter = enums.RxConverter.IRX1
structure.Pcc_Tx_Connector: enums.TxConnector = enums.TxConnector.I12O
structure.Pcc_Tx_Converter: enums.TxConverter = enums.TxConverter.ITX1
structure.Scc_Bb_Board: enums.BasebandBoard = enums.BasebandBoard.BBR1
structure.Scc_Tx_Connector: enums.TxConnector = enums.TxConnector.I12O
structure.Scc_Tx_Converter: enums.TxConverter = enums.TxConverter.ITX1
structure.Scc_Rx_Connector: enums.RxConnector = enums.RxConnector.I11I
structure.Scc_Rx_Converter: enums.RxConverter = enums.RxConverter.IRX1
driver.route.scenario.catRfOut.set_flexible(value = structure)

Activates the scenario ‘2CC - 1x1 1x1’ and selects the signal paths. For possible parameter values, see ‘Values for signal path selection’.

param value:

see the help for FlexibleStruct structure arguments.